Service Pack 7 (Build 3.03.1264)

  • Enhances area & weight calculations for V-Notches for non S&D connectors.
  • Improves the connector hole positions when adding holes to parts.

Service Pack 6 (Build 3.03.1258)

  • Improves the Profile feature so that valid and expected paths are created when using Copy All.
  • Improves Design Line rotation when placing an inline item, such as a valve or vav, so that the node is set to “Default”.
  • Improves stability when importing imperial services.
  • Improves Takeoff as Cut In for directional hangers.
  • Improves stability when editing sub assembly items that do not contain any graphics.

Service Pack 5 (Build 3.03.1238)

  • Improved stability in using Multi Service Takeoff with Hangers when objects are pre-selected.
  • Improved stability when using a Z Strap Hanger while using the Fix Relative option.
  • Improved subassemblies when merging jobs.
  • Improved the updating of support cost information when rod length changes.
  • Improved multi-selecting values for ancillaries.
  • Improved the display of swage connectors when the swage length value is less than 1 but greater than zero.
  • CIDs 7, 417, 947 – Enhanced dimensional accuracy when using connector straight adjusts with the Top Extension.
  • CID 104 – The 3D model length is now consistent with that of CID 8.
  • CIDs 114, 355, 356, 357, 358, 359, 580, 831, 889 – Improved Insulation to be central from branch.
  • CID 397 – Improved stability when developing holes.
  • CID 518 – The visibility of the exhaust fan symbols has been improved.
  • CID 996 – Improved reporting of C2 end size.
  • CID 1112 – Improved sheet metal developments when the part is lined or lagged.
  • CID 2873 – Improved reporting out size Annotation.

Service Pack 4 (Build 3.03.1164)

  • CID 838 – Improved placement of Profile bearer when configured with -ve left or right angled bearer.
  • Improved stability when using compact database with services that have specifications or Insulation specifications assigned.

Service Pack 3 (Build 3.03.1162)

  • CID 838 – Improvement made to the elevation when taking off hangers when the Oversize Item is set to yes.
  • CID 62 – Improved insulation so that it is central on the branch.
  • CID 311 – Improved insulation so that it is central on the branch.
  • CID 379 – Improved insulation so that it is central on the branches.
  • CID 832 – Improved insulation so that it is central on the branches.
  • CID 886 – Improved insulation so that it is central on the branch.
  • CID 7 – Improved connector size for the C2 end.
  • CID 1115 – Improved conical branch to be configured straight.
  • Stability improvement made when importing .rif files.
  • Enhanced window select for Raster underlays when selecting items.
  • Improved stability when taking off Collections.
  • Enhancement made to the Ancillaries dialog usability when using the tab key.
  • Enhancement made to the Connectors dialog usability when using the menu key.
  • Stability improvement made to Design Line when filling in multiple taps along a straight duct.
  • Improvement made to the performance to the Editor Dialog of Design Line.
  • Improved Terminal rotation when being placed.
  • Improved reporting out Qty for Oval items in Design Line.
  • Improved Hanger positioning on design lines when the ‘float’ option is used.
  • Improvement made when re-filling Tee’s in Design Line.

Service Pack 2 (Build 3.03.1122)

  • CID 101 – Improved Imperial dimensions.
  • CID 17 – Improved Gasket allowance when Double Wall is enabled.
  • CID 2524 – Stability improvement made when opening job.
  • CID 2965 – Improved connector positions when using Offset Reducers & geometry when insulated.
  • CID 4 – Improved connector straight allowance for extensions.
  • CID 4 – Improved Gasket allowance when Double Wall is enabled.
  • CID 965 – Improved connector positions when using Offset Reducers & geometry when insulated.
  • Improved Fabrication items by allowing functions to be used in calculated dims.
  • Improved usability when removing holes along with seams for straight duct patterns.
  • CID 838 – Improved Type/Profile Option combinations.
  • Improved Rectangular Straight Adjusts for Taps.
  • Improved visibility for Step Down Connectors.
  • Improved Export 2D Annotation.
  • Enhanced Fabrication & Install rates associated with owned connectors to be editable.
  • Improved support for raster PDF underlays.
  • Stability improvement made to temporary database settings.
  • Improved stability for Insulation Developments.
  • Improved usability when removing Top Fixings Structure types.
  • Enhanced Takeoff As Cut In for Hangers to size outside of the insulation.
  • Improved stability when accessing the connector database when it contains no entries.
  • Stability improvement made to Import Underlay Layers.
  • Improved Dynamic Holes Developments.
  • Improved complex nodes in design line.
  • Improvement made to Design Line to include flanges when branch runs are present.
  • Improved Design Line Pressure Drop Dialog to Export Data.
  • Improved stability with Design Line constraints when adding restrictions.
  • CID 2108 – Improved Design Line fill.
  • Improved Design line fill for Rectangular Taps.
  • Improvement made to Export Items Data when reporting out Square to Round Offset Depth.
  • Improved scripting for owned content.
  • Improved stability to Product Information Viewer.
  • Stability improved for connector node tool tip annotation.
  • Enhanced SetText Lisp method so that it does not add data to objects without Custom Text entries.
  • Enhanced Site Difficulty Factor to view Print Objects.
  • Stability improvement made when using Print Preview in Item Reports.
  • Improved Insulation data output for reports.
  • Improvements made in printing Stiffener Breakpoints.

Service Pack 1 (Build 3.03.1032)

  • CID 535 – Improved Draw Type Options.
  • CID 4 – Improved insulation.
  • Stability improvement made when removing holes from straight ducts.
  • Stability improvement made when loading jobs with dampers.
  • Improved Dynamic Hole Developments.
  • Improved Job Info to increment the number when creating a new job after Batch Process.
  • Improvement made to migration of legacy install where all folders were not being copied over.
  • Improvement made to Dynamic Holes when branches are mirrored.
  • Stability improvement made to Path Repair Tool.
  • Stability improvement made when downloading content.
  • Improvement made to Design Line as reducing bends failed to fill when creating a riser.
  • Improvement made to Design Line re-filling the wrong items.
  • Improvement made to Design Line as reducer was failing to fill when option set to Input Angle.
  • Improvement made to Design Line pressure drop calculations as they were failing at low flow rates.
  • Improvement made to Editmap.exe for option to save EST tables, previously the setting was not being remembered.
  • Improved stability when adding reports that have pressure drop & velocity fields for calculations.