2025.0.1 (Build 25.?.?.???? / Core 25.??.???)

Fixed Issues
  • Database
    • Fixed an issue to improve the persistence of the default length setting when importing specifications into new profiles or other configurations.
  • API
    • Fixed an issue to improve stability when calling itm.update() on a sub-assembly in the API.
  • Pattern
    • Fixed an issue with Shape Change Pattern 8 to ensure the added hole position and shape accurately match the configured dimensions.
    • Fixed an issue to ensure material gauge displays correctly with the new material framework.
  • Usability
    • Fixed an issue to improve stability when importing or cropping underlaid PDFs or DXFs.
  • Open GL
    • Fixed issue with invalid line types displaying on PDFs when selected.
  • Framework
    • Fixed an issue to improve stability when switching to profiles that contain unexpected data.
    • Fixed an issue so that version warnings display when using OPENJOB in CADmep or e-linking jobs in ESTmep that were saved in newer versions.
  • Other
    • Improved security for known vulnerabilities.

2025.0.0 (Build 25.0.0.2144 / Core 25.08.010)

Enhancements
  • Data Output
    • Added the ability to output GUIDs on labels, reports, and worksheets.
  • Database
    • Added support for basic ancillary price and time table breakpoint types.
  • Framework
    • Added 64bit handle values in the API Item.GetFabricationItemFromACADHandle() method.
  • Usability
    • Added a user definable control in the service template to allow coupling limits to be changed for auto-fill scenarios.
    • Improved the message for the path repair tool when no results have been found.
  • Pattern
    • Improved the assignment of male and female notches when using slip and drive connectors on pattern 8..

Fixed Issues

  • Data Output
    • Fixed an issue with the straight pattern overrides so the straight settings match the cut type.
  • API
    • Fixed an issue in the API so that all parts are included when using the job.item call.
    • Fixed an issue in the API to improve performance when using WidthOrDepth and Depth properties and accessing AncillaryUsage.
    • Fixed an issue in the API which caused the Autodesk.Fabrication.Splitter.Sizes to be null.
  • Licensing
    • Fixed an issue with the manage license dialog to maintain focus so mouse clicks are correctly registered.
  • Manufacturing
    • Fixed an issue that prevented roller allowances to be added on oversize parts.
    • Fixed an issue to improve the detail lines when the insulation is set to ‘wraps inside’.
    • Fixed an issue to improve the manufacturability of patterns 939, 959, 1125, 1127, and 1178 by preventing unnotched seam positions from being adjusted too far.
    • Fixed an issue to prevent ductboard patterns from developing incorrectly when either the connector notch is configured to ‘Notch Out’ or when the straight adjustment is 0.
    • Fixed an issue to prevent nested panels from overlapping when nesting segmented elbows.
    • Fixed an issue with damper holes when using double wall skins with connectors using different extensions.
  • Pattern
    • Fixed an issue on pattern 26 to correct the hole rotation.
    • Fixed an issue on pattern 330 to only warn of restricted flow once when configured to reduce the original cross section.
    • Adjusted pattern 8 (Square to Round) so it obeys the notch out setting in the connector notch section when unchecked.
    • Corrected the overall length on patterns 328 & 480 when using connectors with straight adjustments configured.
    • Fixed an issue to improve developments on patterns 943, 945,953, 954, 955 when using connectors configured with straight adjust values.
    • Fixed an issue to improve the accuracy of the LUKA area calculations on bend patterns when the angle is not 90 degrees.
    • Fixed an issue to improve the behavior of straights configured with calculated lengths to prevent length overwrite by the carry over.
    • Fixed an issue to improve the model geometry on pattern 834.
    • Fixed an issue to improve the seam developments when using a custom notch for the “Notch for Connector Split” setting in the notch section of the pattern options.
    • Fixed an issue to improve the square to round patterns (8, 28, 34, and 450) to ensure correctness when using a negative seam on S1 and either a non-corner seam position or center-configured width and depth offsets.
    • Fixed an issue to prevent notches from removing more material than expected.
    • Improved invalid geometry clues to highlight problematic options more accurately.
    • Corrected skewed dimension lines on the mitred offset patterns.
    • Fixed an issue with the dynamic hole feature to prevent holes from being lost.
    • Fixed an issue with the rectangular radius bend patterns to prevent the back wrapper from clipping when using non 90 degree seam angles.
    • Fixed an issue with the rectangular taper patterns so that the seam is notched out fully when configured to do so in the notch settings.
  • Usability
    • Corrected an issue in the edit part dialog that now accurately updates connector indicator positions when scrolling through sizes in the size dropdown.
    • Fixed an issue to improve stability when viewing NC data with the installed machines dialog open.
    • Improved product resilience by preventing areas of the user interface from reacting to user inputs while the manage license dialog is open.
  • Database
    • Fixed an issue so that adding new service templates no longer requires multiple clicks.
    • Fixed an issue to allow the modification of ‘Fill Missing Tool Data’ in the tools section of installed machines.
  • Framework
    • Fixed a sporadic issue that could lead to poor stability when browsing for scripts through the user interface.
  • Scripting
    • Fixed an issue to include seams and notches when exporting as a .dxf via scripting.
  • Interoperability
    • Fixed an issue to improve the DXF export with layers feature, allowing each tool to export a unique layer.
  • Other
    • Fixed an issue with folders to accommodate a period suffix on long paths.